How to install a rubber threshold ramp

Quick answer: Most rubber threshold ramps need no tools. Measure the height of the door lip or step, choose a ramp with the same rise, sweep the floor, then push the ramp’s high edge flush against the lip with the slope facing out. A heavy recycled rubber ramp stays in place on its own, inside or outside.
What you need
- A tape measure
- A broom
- A rubber ramp with the same rise as your step
Step by step
Time needed: 5 minutes
- Measure the rise.
Measure from the floor to the top of the door lip or step, in millimetres. If it changes across the doorway, use the highest point.
- Pick the matching ramp.
Choose the ramp with the same rise. Our ramp calculator shows how far each gradient runs out. For example, a 30mm step at 1:8 needs a ramp 240mm deep.
- Check the space.
Make sure there’s enough clear floor in front of the step for the ramp’s depth, and that any door opening over it still clears.
- Sweep the floor.
Clear away dust, leaves and grit so the ramp sits flat.
- Place the ramp.
Push the high edge flush against the lip, slope facing the way people come from, and centre it in the doorway. Then roll a wheelchair, walker or trolley over it slowly to test it.
Which gradient should I choose?
| Gradient | Depth for a 30mm step | Best for |
|---|---|---|
| 1:10 | 300mm | The gentlest slope, good for manual wheelchairs |
| 1:8 | 240mm | Our standard choice for most doorways |
| 1:5 | 150mm | Tight spaces, walkers and robot vacuums |
Our 1:10 step ramps and 1:14 ramps are made to meet AS 1428.1 requirements for gradient, width and landings. Our 1:8 threshold ramps meet it for rises up to 35mm.
Common questions
No. A rubber threshold ramp is heavy and sits in place on its own, so there’s nothing to drill or glue.
Yes. Just lift it and place it at the new door. It’s handy for rentals, because nothing is fixed down.
Yes. Recycled rubber is made for outdoor use, so it can go at front doors, sliding doors and back steps.
Call us on (03) 7073 2121 or ask for a custom ramp. We make rubber ramps to measure in any size or shape.
Yes. We supply and install across Victoria, and deliver Australia-wide.
Shop rubber ramps
Australian Made from recycled rubber, in 5 colours, with a 2-year warranty. See all rubber ramps or get a custom size. Planning a bigger job? Read our guide to wheelchair ramps for home.